Optical Fiber RoHS Compliant 10GB/S SFP+ Bi-Directional Transceiver, 40km Reach

Model NO.
GFC-OLSBxx1XL-C(I)D40
Information content
Data
Certification
CE, ISO, RoHS
Condition
New
Warranty
3 Years
Distance
40km
Delivery Time
3-7 Days
Transport Package
Antistatic Bag
Specification
10G
Trademark
GFC
Origin
Zhejiang China
HS Code
8517706000
Production Capacity
50K/Month
Reference Price
Please contact us for quote
Contact Us

Product Description

Product Features

  • Supports 9.95 to 11.3Gb/s bit   rates
  • Simplex LC   Connector
  • Hot pluggable SFP+ footprint
  • Uncooled 1270nm DFB transmitter, 1330nm PIN   photo-detector
  • Uncooled 1330nm DFB transmitter, 1270nm PIN   photo-detector
  • Applicable for 40km SMF   connection
  • Low power consumption, <   1.2W
  • Digital Diagnostic Monitor   Interface
  • Optical interface compliant to IEEE 802.3ae   10GBASE-ER
  • Electrical interface compliant to   SFF-8431
  • Operating case temperature: Commerical:0 to 70 °C Industrial:-40 to 85   °C
 

Applications

  • 10GBASE-ER at   10.3125Gbps
  • 10GBASE-EW at   9.953Gbps
  • Other optical   link


Product Descriptions
GFC-OLSBxx1XL-C(I)D40 series single mode transceiver is small form factor pluggable module for optical data communications such as 10GBASE-ER/EW defined by IEEE 802.3ae. It is with the SFP+ 20-pin connector to allow hot plug capability. The OLSBxx1XL-CD40 module is designed for single mode fiber and operates at a nominal wavelength of 1270nm or 1330nm; The transmitter section uses a multiple quantum well DFB, which is class 1 laser compliant according to International Safety Standard IEC-60825.The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. The transceiver designs are optimized for high perform -ance and cost effective to supply customers the best solutions for   telecommunication.

Functional Diagram

Optical Fiber RoHS Compliant 10GB/S SFP+ Bi-Directional Transceiver, 40km Reach
Absolute Maximum Ratings
 
Parameter Symbol Min. Max. Unit Note
Supply Voltage Vcc -0.5 4.0 V  
Storage Temperature T S -40 85 °C  
Relative Humidity RH 0 85 %  

Note:   Stress in excess of the maximum absolute ratings can cause permanent damage to the transceiver.


 

General Operating Characteristics

 
Parameter Symbol Min. Typ Max. Unit Note
Data Rate D R 9.95   10.3125 Gb/s  
Supply Voltage Vcc 3.13 3.3 3.47 V  
Supply Current Icc 5     330 mA  
Operating Case Temp. Tc 0   70 °C  
T I -40   85  


Electrical Characteristics ( T OP(C)  = 0 to 70 ºC , T OP(I)  =-40 to 85 ºC ,V CC  = 3.13 to 3.47 V )
 
Parameter Symbol Min. Typ Max. Unit Note
Transmitter
Differential data input swing V IN,PP 180   700 m Vpp 1
Transmit Disable Voltage V D V CC -0.8   Vcc V  
Transmit Enable Voltage V EN Vee   Vee+0.8
Input differential impedance Rin   100   Ω  
Receiver
Differential data output swing V out,pp 300   850 m Vpp 2
Output rise time and fall time T r , T f 28     Ps 3
LOS asserted V LOS_F V CC -0.8   Vcc V 4
LOS de-asserted V LOS_N Vee   Vee+0.8 V 4

Notes:

  1. Connected   directly   to   TX   data   input   pins.   AC   coupling   from   pins   into   laser   driver   IC.
  2. Into 100 differential   termination.
  3. 20   -   80%.   Measured   with   Module   Compliance   Test   Board   and   OMA   test   pattern.   Use   of   four  1's   and   four   0's   sequence   in   the   PRBS   9   is   an acceptable   alternative.
  4. LOS   is   an   open   collector   output.   Should   be   pulled   up   with   4.7k   -   10k   on   the   host   board.   Normal   operation   is   logic   0;   loss   of   signal   is   logic   1.


Optical Characteristics ( T OP(C)  = 0 to 70 ºC , T OP(I)  =-40 to 85 ºC ,V CC  = 3.13 to 3.47 V )
 
Parameter Symbol Min. Typ Max. Unit Note
Transmitter
Operating Wavelength λ 1260 1270 1280 nm  
1320 1330 1340  
Ave. output power (Enabled) P AVE 0   5 dBm 1
Side-Mode Suppression Ratio SMSR 30     dB  
Extinction Ratio ER 5     dB  
RMS spectral width Δλ     1 nm  
Rise/Fall time (20%~80%) Tr/T f     50 ps  
Dispersion penalty T DP     3.2 dB  
Relative Intensity Noise R IN     -128 dB/Hz  
Output Optical Eye Compliant with IEEE 0802.3ae
Receiver
Operating Wavelength λ 1320 1330 1340 nm  
1260 1270 1280  
Receiver Sensitivity P SEN2     -16 dBm 2
Average Receive Power P AVE     0.5 dBm  
Receiver Reflectance R rx     -12 dB  
LOS Assert Pa -30     dBm  
LOS De-assert Pd     -17 dBm  
LOS Hysteresis Pd-Pa 0.5     dB  

Notes:

  1. Average power figures are informative only, per IEEE   802.3ae.
  2. Measured with worst ER=6; BER<10 -12 ; 2 31 - 1   PRBS.

Digital Diagnostic Specifications


The OLSBxx1XL-C(I)D40 transceivers can be used in host systems that require either internally or externally calibrated digital diagnostics.
 
Parameter Symbol Units Min. Max. Accuracy Note
Transceiver temperature D Temp-E ºC -45 +90 ±5ºC 1,2
Transceiver supply voltage D Voltage V 2.8 4.0 ±3%  
Transmitter bias current D Bias mA 0 127 ±10% 3
Transmitter output power D Tx-Power dBm -2 +6 ±2dB  
Receiver average input power D Rx-Power dBm -20 +1 ±2dB  

Notes:

  1. When Operating temp.=0~70 ºC,the range will be   min=-5,Max=+75
  2. Internally   measured
  3. The accuracy of the Tx bias current is 10% of the actual current from the laser driver to the   laser
 

Typical Interface Circuit

Optical Fiber RoHS Compliant 10GB/S SFP+ Bi-Directional Transceiver, 40km Reach

Recommended power supply filter Optical Fiber RoHS Compliant 10GB/S SFP+ Bi-Directional Transceiver, 40km Reach

Package Dimensions

Optical Fiber RoHS Compliant 10GB/S SFP+ Bi-Directional Transceiver, 40km Reach
Optical Fiber RoHS Compliant 10GB/S SFP+ Bi-Directional Transceiver, 40km Reach


 

 

Communication Module

KIEV.UA, 2023