Optical Fiber RoHS Compliant 10GB/S SFP+ Bi-Directional Transceiver, 80km Reach

Model NO.
GFC-OLSBxx1XL-CDH1
Information content
Data
Certification
CE, ISO, RoHS
Condition
New
Warranty
3 Years
Distance
80km
Delivery Time
3-7 Days
Transport Package
Antistatic Bag
Specification
10G
Trademark
GFC
Origin
Zhejiang China
HS Code
8517706000
Production Capacity
50K/Month
Reference Price
Please contact us for quote
Contact Us

Product Description

Product Features

  • Supports 9.95 to 11.3Gb/s bit   rates
  • Simplex LC   Connector
  • Hot pluggable SFP+ footprint
  • Cooled 1530nm EML transmitter, 1550nm APD   receiver
  • Cooled 1550nm EML transmitter, 1530nm APD   receiver
  • Applicable for 80km SMF   connection
  • Low power consumption, <   1.5W
  • Digital Diagnostic Monitor   Interface
  • Optical interface compliant to IEEE 802.3ae   10GBASE-ZR
  • Electrical interface compliant to   SFF-8431
  • Operating case temperature: Commerical:0 to 70   °C


Applications
  • 10.3125Gbps   Ethernet
  • Other optical   link


Product Descriptions
GFC-OLSBxx1XL-CDH1 series single mode transceiver is small form factor pluggable module for optical data communications such as 10G Ethernet. It is with the SFP+ 20-pin connector to allow hot plug capability. The OLSBxx1XL-CD80 module is designed for single mode fiber and operates at a nominal  wavelength of 1530nm or 1550nm; The transmitter section uses a EML laser, which is class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section consists of a APD photodiode integrated with a TIA. The transceiver designs are optimized for high perform -ance and cost effective to supply customers the best solutions for   telecommunication.

Functional Diagram
Optical Fiber RoHS Compliant 10GB/S SFP+ Bi-Directional Transceiver, 80km Reach

Absolute Maximum Ratings
 
Parameter Symbol Min. Max. Unit Note
Supply Voltage Vcc -0.5 4.0 V  
Storage Temperature T S -40 85 °C  
Relative Humidity RH 0 85 %  

Note:   Stress in excess of the maximum absolute ratings can cause permanent damage to the transceiver.


 

General Operating Characteristics

 
Parameter Symbol Min. Typ Max. Unit Note
Data Rate D R 9.95 10.3125 11.3 Gb/s  
Supply Voltage Vcc 3.13 3.3 3.47 V  
Supply Current Icc 5     450 mA  
Operating Case Temp. Tc 0   70 °C  


Electrical Characteristics ( T OP(C) = 0 to 70 ºC , V CC  = 3.13 to 3.47 V )
 
Parameter Symbol Min. Typ Max. Unit Note
Transmitter
Differential data input swing V IN,PP 120   850 m Vpp 1
Transmit Disable Voltage V D V CC -0.8   Vcc V  
Transmit Enable Voltage V EN Vee   Vee+0.8
Input differential impedance Rin   100   Ω  
Receiver
Differential data output swing V out,pp 300   850 m Vpp 2
Output rise time and fall time T r , T f 28     Ps 3
LOS asserted V LOS_F V CC -0.8   Vcc V 4
LOS de-asserted V LOS_N Vee   Vee+0.8 V 4

Notes:

  1. Connected   directly   to   TX   data   input   pins.   AC   coupling   from   pins   into   laser   driver   IC.
  2. Into 100 differential   termination.
  3. 20   -   80%.   Measured   with   Module   Compliance   Test   Board   and   OMA   test   pattern.   Use   of   four  1's   and   four   0's   sequence   in   the   PRBS   9   is   an acceptable   alternative.
  4. LOS   is   an   open   collector   output.   Should   be   pulled   up   with   4.7k   -   10k   on   the   host   board.   Normal   operation   is   logic   0;   loss   of   signal   is   logic   1.



Optical Characteristics ( T OP(C) = 0 to 70 ºC ,V CC  = 3.13 to 3.47 V )
 
Parameter Symbol Min. Typ Max. Unit Note
Transmitter
Operating Wavelength λ 1525.5 1530 1537.5 nm  
1542.5 1550 1557.5  
Ave. output power (Enabled) P AVE 0   5 dBm 1
Side-Mode Suppression Ratio SMSR 30     dB  
Extinction Ratio ER 9     dB  
RMS spectral width Δλ     1 nm  
Rise/Fall time (20%~80%) Tr/T f     50 ps  
Dispersion penalty T DP     3.2 dB  
Relative Intensity Noise R IN     -128 dB/Hz  
Output Optical Eye Compliant with IEEE 0802.3ae
Receiver
Operating Wavelength λ 1542.5 1550 1557.5 nm  
1522.5 1530 1557.5  
Receiver Sensitivity P SEN1     -22 dBm 2
Overload P AVE     -7 dBm  
LOS Assert Pa -35     dBm  
LOS De-assert Pd     -24 dBm  
LOS Hysteresis Pd-Pa 0.5     dB  

Notes:

  1. Average power figures are informative only, per IEEE   802.3ae.
  2. Measured with worst ER=9; BER<10 -12 ; 2 31 - 1   PRBS.

Digital Diagnostic Specifications


The OLSBxx1XL-CD80 transceivers can be used in host systems that require either internally or externally calibrated digital diagnostics.
 
Parameter Symbol Units Min. Max. Accuracy Note
Transceiver temperature D Temp-E ºC -5 +75 ±5ºC 1
Transceiver supply voltage D Voltage V 2.8 4.0 ±3%  
Transmitter bias current D Bias mA 0 127 ±10% 2
Transmitter output power D Tx-Power dBm -2 +7 ±2dB  
Receiver average input power D Rx-Power dBm -24 0 ±2dB  

Notes:

  1. Internally   measured
  2. The accuracy of the Tx bias current is 10% of the actual current from the laser driver to the   laser
 

Typical Interface Circuit

Optical Fiber RoHS Compliant 10GB/S SFP+ Bi-Directional Transceiver, 80km Reach

Recommended power supply filter
Optical Fiber RoHS Compliant 10GB/S SFP+ Bi-Directional Transceiver, 80km Reach
 

Package Dimensions

Optical Fiber RoHS Compliant 10GB/S SFP+ Bi-Directional Transceiver, 80km Reach
Optical Fiber RoHS Compliant 10GB/S SFP+ Bi-Directional Transceiver, 80km Reach

 

 

Communication Module

KIEV.UA, 2023