Optical Fiber RoHS Compliant 10GB/S XFP Bi-Directional Transceiver, 80km Reach

Model NO.
GFC-OLXBxx1XL-CD80
Information content
Data
Certification
CE, ISO, RoHS
Condition
New
Warranty
3 Years
Distance
80km
Delivery Time
3-7 Days
Transport Package
Antistatic Bag
Specification
XFP 80KM
Trademark
GFC
Origin
Zhejiang China
HS Code
8517706000
Production Capacity
50K/Month
Reference Price
Please contact us for quote
Contact Us

Product Description

Product Features

  • Supports 9.95 to 11.3Gb/s bit   rates
  • Simplex LC   Connector
  • Hot-pluggable XFP   footprint
  • Cooled 1490nm EML transmitter, 1550nm APD   receiver
  • Cooled 1550nm EML transmitter, 1490nm APD   receiver
  • Applicable for 80km SMF   connection
  • Low power consumption, <   3.5W
  • Digital Diagnostic Monitor   Interface
  • Optical interface compliant to IEEE 802.3ae   10GBASE-ZR
  • Electrical interface compliant to   SFF-8431
  • Operating case temperature: Commerical:0 to 70   °C


Applications
  • 10GBASE-BX 10.3125Gb/s Ethernet
  • 10GBASE-BX 9.953Gb/s Ethernet
  • SONET OC-192 &SDH STM   I-64.1
  • Other optical   link


Product Descriptions
GFC-OLXBxx1XL-CD80 transceivers are designed for 10G Ethernet 10G, and it can supportdata-rate from 9.953Gb/s to 11.3Gb/s.Digital diagnostics are avail-able via I2C interface as specified in the XFP MSA.The transceiver designs are optimized for high per-formance and cost effective to supply customers the best solutions for data-com and telecom applications.

Functional Diagram
Optical Fiber RoHS Compliant 10GB/S XFP Bi-Directional Transceiver, 80km Reach

Absolute Maximum Ratings
 
Parameter Symbol Min. Max. Unit Note
Supply Voltage Vcc -0.5 4.0 V  
Storage Temperature T S -40 85 °C  
Relative Humidity RH 0 85 %  

Note:   Stress in excess of the maximum absolute ratings can cause permanent damage to the transceiver.


 

General Operating Characteristics

 
Parameter Symbol Min. Typ Max. Unit Note
Data Rate D R 9.95 10.3125 11.3 Gb/s  
Supply Voltage Vcc 3.13 3.3 3.47 V  
Supply Current Icc 5     450 mA  
Operating Case Temp. Tc 0   70 °C  


Electrical Characteristics ( T OP(C) = 0 to 70 ºC , V CC  = 3.13 to 3.47 V )
 
Parameter Symbol Min. Typ Max. Unit Note
Transmitter
Differential data input swing V IN,PP 120   850 m Vpp 1
Transmit Disable Voltage V D V CC -0.8   Vcc V  
Transmit Enable Voltage V EN Vee   Vee+0.8
Input differential impedance Rin   100   Ω  
Receiver
Differential data output swing V out,pp 300   850 m Vpp 2
Output rise time and fall time T r , T f 28     Ps 3
LOS asserted V LOS_F V CC -0.8   Vcc V 4
LOS de-asserted V LOS_N Vee   Vee+0.8 V 4

Notes:

  1. Connected   directly   to   TX   data   input   pins.   AC   coupling   from   pins   into   laser   driver   IC.
  2. Into 100 differential   termination.
  3. 20   -   80%.   Measured   with   Module   Compliance   Test   Board   and   OMA   test   pattern.   Use   of   four  1's   and   four   0's   sequence   in   the   PRBS   9   is   an acceptable   alternative.
  4. LOS   is   an   open   collector   output.   Should   be   pulled   up   with   4.7k   -   10k   on   the   host   board.   Normal   operation   is   logic   0;   loss   of   signal   is   logic   1.



Optical Characteristics ( T OP(C) = 0 to 70 ºC ,V CC  = 3.13 to 3.47 V )
 
Parameter Symbol Min. Typ Max. Unit Note
Transmitter
Operating Wavelength λ 1470 1490 1510 nm  
1530 1550 1565  
Ave. output power (Enabled) P AVE 0   5 dBm 1
Side-Mode Suppression Ratio SMSR 30     dB  
Extinction Ratio ER 9     dB  
RMS spectral width Δλ     1 nm  
Rise/Fall time (20%~80%) Tr/T f     50 ps  
Dispersion penalty T DP     3.2 dB  
Relative Intensity Noise R IN     -128 dB/Hz  
Output Optical Eye Compliant with IEEE 0802.3ae
Receiver
Operating Wavelength λ 1530 1550 1565 nm  
1470 1490 1510  
Receiver Sensitivity P SEN1     -22 dBm 2
Overload P AVE -7     dBm  
LOS Assert Pa -35     dBm  
LOS De-assert Pd     -23 dBm  
LOS Hysteresis Pd-Pa 0.5     dB  

Notes:

  1. Average power figures are informative only, per IEEE   802.3ae.
  2. Measured with worst ER=9; BER<10 -12 ; 2 31 - 1   PRBS.

Management Interface

The OLXBxx1XL-CD80 incorporates an XFP-compliant, two-wire management interface which is used for serial ID, digital diagnostics, and certain control functions. It is modeled on the SFF-8472 specification modified to accommodate a single two-wire interface address. In addition to the basic I 2 C read/write functionality, the modules support packet error checking that, when enabled, allows the host system to confirm the validity of any read data. Details of the protocol and interface are explicitly described in the MSA. Please refer to the MSA for design reference.The digital diagnostic memory map specific data field defines as   following: Optical Fiber RoHS Compliant 10GB/S XFP Bi-Directional Transceiver, 80km Reach

Typical Interface Ciruit

Optical Fiber RoHS Compliant 10GB/S XFP Bi-Directional Transceiver, 80km Reach
Package Dimensions
Optical Fiber RoHS Compliant 10GB/S XFP Bi-Directional Transceiver, 80km Reach

Optical Fiber RoHS Compliant 10GB/S XFP Bi-Directional Transceiver, 80km Reach

 
 


 

 

Communication Module

KIEV.UA, 2023