Optical Fiber RoHS Compliant 10GB/S XFP CWDM 40km Optical Transceiver

Model NO.
GFC-OLXCxx1XL-C(I)D40
Information content
Data
Certification
CE, ISO, RoHS
Condition
New
Warranty
3 Years
Distance
20km
Delivery Time
3-7 Days
Transport Package
Antistatic Bag
Specification
10G
Trademark
GFC
Origin
Zhejiang China
HS Code
8517706000
Production Capacity
50K/Month
Reference Price
Please contact us for quote
Contact Us

Product Description

Product Features

  • Supports 9.95 to 11.3Gb/s bit   rates
  • Duplex LC   connector
  • Hot-pluggable XFP   footprint
  • Cooled 1470nm~1610nm EML transmitter, PIN   photo-detector
  • Applicable for 40km SMF   connection
  • Low power consumption,   <2.0W
  • Digital Diagnostic Monitor   Interface
  • XFP MSA Rev 4.5   Compliant
  • Operating case   temperature:
Commerical:0 to 70 °C Industrial:-40 to 85°C

Applications
  • 10GBASE-ER at   10.3125Gbps
  • SONET OC-192&SDH STM   64
  • Other optical   links


Product Descriptions
GFC-OLXCxx1XL-C(I)D40 is Transceiver exhibits excellent wavelength stability, cost effective module. It is designed for 10G CWDM SDH, 10GBASE-ER/EW and 10G Fiber- Channel applications. The transceiver consists of two sections: The transmitter section incorporates a cooled EML laser. And the receiver section consists of a PIN photodiode integrated with a TIA. All modules satisfy class I laser safety requirements. The CWDM XFP transceiver provides an enhanced monitoring interface, which allows real-time access to device operating parameters such as transceiver temperature, laser bias current, transmitted optical power, received optical power and transceiver supply   voltage.

Functional Diagram

Optical Fiber RoHS Compliant 10GB/S XFP CWDM 40km Optical Transceiver
Absolute Maximum Ratings
 
Parameter Symbol Min. Max. Unit Note
Supply Voltage Vcc -0.5 4.0 V  
Storage Temperature T S -40 85 °C  
Relative Humidity RH 0 85 %  

Note:   Stress in excess of the maximum absolute ratings can cause permanent damage to the transceiver.


 

General Operating Characteristics

 
Parameter Symbol Min. Typ Max. Unit Note
Data Rate DR 9.95 10.3125 11.3 Gb/s  
Supply Voltage Vcc 3.13 3.3 3.47 V  
Supply Current Icc 5     500 mA  
Operating Case Temp. Tc 0   70 °C  
T I -40   85  


Electrical Characteristics ( T OP(C)  = 0 to 70 ºC , T OP(I)  =-40 to 85 ºC ,V CC  = 3.13 to 3.47 V )
 
Parameter Symbol Min. Typ Max. Unit Note
Transmitter
Differential data input swing V IN,PP 120   820 m Vpp 1
Tx Disable input_High V IH 2.0   Vcc+0.3 V  
Tx Disable input_Low V IL 0   0.8 V  
Tx Fault output_High V OH 2.0   Vcc+0.3 V 2
Tx Fault output_Low V OL 0   0.8 V 2
Input differential impedance Rin   100   Ω  
Receiver
Differential data output swing V out,pp 340   800 m Vpp 3
LOS asserted V LOS_F V CC -0.8   Vcc V 2
LOS de-asserted V LOS_N Vee   Vee+0.8 V 2

Notes:

  1. TD+/-   are   internally   AC   coupled   with   100Ω   differential   termination   inside   the   module.
  2. Tx   Fault   and   Rx   LOS   are   open   collector   outputs,   which   should   be   pulled   up   with   4.7k   to   10kΩ   resistors   on   the   host   board.   Pull   up   voltage   between 3..0V and   Vcc+0.3V.
Note 3) RD+/- outputs are internally AC coupled, and should be terminated with 100Ω (differential) at the user SERDES.



Optical Characteristics ( T OP(C)  = 0 to 70 ºC , T OP(I)  =-40 to 85 ºC ,V CC  = 3.13 to 3.47 V )
 
Parameter Symbol Min. Typ Max. Unit Note
Transmitter
Operating Wavelength λ λ -7.5nm λ λ +7.5nm nm 1
Ave. output power (Enabled) P AVE -1   2 dBm 2
Side-Mode Suppression Ratio SMSR 30     dB  
Extinction Ratio ER 8.2     dB  
RMS spectral width Δλ     0.45 nm  
Rise/Fall time (20%~80%) Tr/T f     45 ps  
Dispersion penalty T DP     3 dB  
Relative Intensity Noise R IN     -128 dB/Hz  
Output Optical Eye Compliant with IEEE 0802.3ae
Receiver
Operating Wavelength λ 1260   1620 nm  
Receiver Sensitivity P SEN     -16 dBm 3
Overload P AVE 0.5     dBm  
LOS Assert Pa -30     dBm  
LOS De-assert Pd     -17 dBm  
LOS Hysteresis Pd-Pa 0.5     dB  

Notes:

  1. The wavelength λ =1470nm~1610nm, Total 8 wavelengths,20nm   spacing
  2. Measured   at   10.3125b/s   with   PRBS   2 31   -   1   NRZ   test   pattern.
  3. Under   the   ER   worst   =8.2,   measured   at   10.3125   Gb/s   with   PRBS   2 31   -   1   NRZ   test   pattern   for   BER   <   1x10 -12

Management Interface

The OLXC xx 1XL-C(I)D40,incorporates an XFP-compliant, two-wire management interface which is used for serial ID, digital diagnostics, and certain control functions. It is modeled on the SFF-8472 specification modified to accommodate a single two-wire interface address. In addition to the basic I 2 C read/write functionality, the modules support packet error checking that, when enabled, allows the host system to confirm the validity of any read data. Details of the protocol and interface are explicitly described in the MSA. Please refer to the MSA for design reference.The digital diagnostic memory map specific data field defines as   following:
Optical Fiber RoHS Compliant 10GB/S XFP CWDM 40km Optical Transceiver
 

Typical Interface Ciruit

Optical Fiber RoHS Compliant 10GB/S XFP CWDM 40km Optical Transceiver
Package Dimensions
Optical Fiber RoHS Compliant 10GB/S XFP CWDM 40km Optical Transceiver

Optical Fiber RoHS Compliant 10GB/S XFP CWDM 40km Optical Transceiver

 

 

Communication Module

KIEV.UA, 2023