Optical Fiber RoHS Compliant 10gbps 80km Tunable XFP Optical Transceiver

Model NO.
GFC-OLTDXX1XL-CD80
Information content
Data
Certification
CE, ISO, RoHS
Condition
New
Delivery Time
3-7 Days
Distance
80km
Warranty
3 Years
Transport Package
Antistatic Bag
Specification
10G
Trademark
GFC
Origin
Zhejiang China
HS Code
8517706000
Production Capacity
50K/Month
Reference Price
Please contact us for quote
Contact Us

Product Description

Product Features

  • Supports 9.95 to 11.3Gb/s bit   rates
  • Simplex LC   Connector
  • Hot-pluggable XFP   footprint
  • Full C-band tunable transmitter and APD   receiver
  • 50GHz ITU Grid,   C-Band( 1528.77~1563.86nm)
  • Applicable for 80km SMF   connection
  • Low power consumption, <   3.5W
  • Digital Diagnostic Monitor   Interface
  • Operating case temperature: Commerical:0 to 70   °C
 

Applications

  • DWDM 10G SONET/SDH
  • DWDM, IEEE 10GBASE-ZR based Ethernet
  • ITU G.709 / OTN FEC   applications
  • Other optical   link
 

Product Descriptions

GFC-OLTDXX1XL-CD80 is tunable XFP Transceiver exhibits excellent wavelength stability, supporting operation at 100GHz channel, cost effective module. It is designed for 10G  tunable  SDH 10GBASE-ZR and 10G Fiber- Channel applications. The transceiver consists of two sections: The transmitter section incorporates a tunable EML laser. And the receiver section consists of a APD photodiode integrated with a TIA. All modules satisfy class I laser safety requirements. The tunable XFP transceiver provides an enhanced monitoring interface, which allows real-time access to device operating parameters such as transceiver temperature, laser bias current, transmitted optical power, received optical power and transceiver supply   voltage.
 

Functional Diagram

Optical Fiber RoHS Compliant 10gbps 80km Tunable XFP Optical Transceiver
Absolute Maximum Ratings
 
Parameter Symbol Min. Max. Unit Note

Supply Voltage 		Vcc3 -0.3 3.63 V  
Vcc2 -0.3 1.98 V  
Vcc5 -0.5 6 V  
Storage Temperature T S -40 85 °C  
Relative Humidity RH 0 85 %  

Note:   Stress in excess of the maximum absolute ratings can cause permanent damage to the transceiver.


 

General Operating Characteristics

 
Parameter Symbol Min. Typ Max. Unit Note
Data Rate D R 9.95 10.3125 11.3 Gb/s  

Supply Voltage 		Vcc3 3.13 3.3 3.47 V  
Vcc2 1.71 1.8 1.98 V  
Vcc5 4.75 5 5.25 V  

Supply Current 		Icc3     750 mA  
Icc2     500 mA  
Icc5     1000 mA  
Operating Case Temp. Tc 0   70 °C  


Electrical Characteristics ( T OP(C) = 0 to 70 ºC , V CC  = 3.13 to 3.47 V )
 
Parameter Symbol Min. Typ Max. Unit Note
Transmitter
Differential data input swing V IN,PP 120   820 m Vpp 1
Transmit Disable Voltage V D 2.0   Vcc V  
Transmit Enable Voltage V EN Vee   Vee+0.8
Input differential impedance Rin   100   Ω  
Receiver
Differential data output swing V out,pp 300   850 m Vpp 2
Output rise time and fall time T r , T f 28     Ps 3
LOS asserted V LOS_F V CC -0.8   Vcc V 4
LOS de-asserted V LOS_N Vee   Vee+0.8 V 4
Notes:
  1. Connected   directly   to   TX   data   input   pins.   AC   coupling   from   pins   into   laser   driver   IC.
  2. Into 100 differential   termination.
  3. 20   -   80%.   Measured   with   Module   Compliance   Test   Board   and   OMA   test   pattern.   Use   of   four  1's   and   four   0's   sequence   in   the   PRBS   9   is   an acceptable   alternative.
  4. LOS   is   an   open   collector   output.   Should   be   pulled   up   with   4.7k   -   10k   on   the   host   board.   Normal   operation   is   logic   0;   loss   of   signal   is   logic   1.


Optical Characteristics ( T OP(C)  = 0 to 70 ºC , T OP(I)  =-40 to 80 ºC ,V CC  = 3.13 to 3.47 V )
 
Parameter Symbol Min. Typ Max. Unit Note
Transmitter
Operating Wavelength λc 1528.384   1568.773 nm  
Center Wavelength (End of Life) λc_ EOL   λc±25pm      
Ave. output power (Enabled) P AVE -1   3 dBm 1
Side-Mode Suppression Ratio SMSR 30     dB  
Extinction Ratio ER 9     dB  
Relative Intensity Noise R IN     -128 dB/Hz  
Output Optical Eye IEEE 802.3-2005 Compliant
Receiver
Operating Wavelength λ 1528.384   1568.773 nm  
Receiver Sensitivity P SEN1     -23 dBm 2
Overload P AVE     -7 dBm  
LOS Assert Pa -35     dBm  
LOS De-assert Pd     -24 dBm  
LOS Hysteresis Pd-Pa 0.5     dB  
Notes:
  1. Average power figures are informative only, per IEEE   802.3ae.
  2. Measured with worst ER=9; BER<10 -12 ; 2 31 - 1   PRBS.

Management Interface

The transceivers provide serial ID memory contents and diagnostic information about the present operating conditions by the 2-wire serial interface (SCL, SDA).
The Module provides diagnostic information about the present operating conditions. The transceiver generates this diagnostic data by digitization of internal analog signals Alarm/warning threshold data is written during device manufacture. Received power monitoring, transmitted power monitoring, bias current monitoring, supply voltage monitoring and temperature monitoring all are implemented.
The digital diagnostic memory map specific data field defines as following.
Optical Fiber RoHS Compliant 10gbps 80km Tunable XFP Optical Transceiver
 

TYPICAL INTERFACE CIRCUIT

Optical Fiber RoHS Compliant 10gbps 80km Tunable XFP Optical Transceiver
Package Dimensions
Optical Fiber RoHS Compliant 10gbps 80km Tunable XFP Optical Transceiver

Optical Fiber RoHS Compliant 10gbps 80km Tunable XFP Optical Transceiver


 

 

Communication Module

KIEV.UA, 2023