Description de Produit
D series metal laser 3D printer is a 3D printing equipment specially designed for the production of dental metal restorations. Using oral digital 3D printing technology, that is, the patient does not need to bite the dental model, the doctor can use the three-dimensional oral scanner to form a digital model, and then the denture base crown can be printed out.
ADVANTAGES OF RITON ADDITIVE D SERIES PRODUCTS
1-The equipment covers an area of small, adapt to the limitation of denture factory site.
2-The printing efficiency of the equipment is at least 30% higher than that of similar equipment.
3-The forming chamber has a small space, and the staff does not need to inflate the equipment before printing.
4-The printing baseplate is fixed by magnetic suction, and manual leveling is not required before printing.
5-The light path and circuit part of the equipment are completely isolated from the powder forming part, which fully guarantees the service life of the equipment.
D-150 SPECIAL PRINTING EQUIPMENT FOR CERAMIC FUSED METAL INNER CROWN
Efficiency: 200 metal base crowns are processed in 4.5 hours
D-150 THE MAIN PARAMETER OF D-150
Laser source: Single Fiber lasers
Output power : ≤300W
Laser wavelength: 1.064μm
Melting speed: ≤14000mm/s
Melting area: φ100mm/φ150mm
Melting thickness:20-50 μm
Protect gas: Nitrogen / Argon
Production:220 pieces of crown/14 pieces of partial frame need 4 hour
Power supply: 4.5KW 220V
Whole weight: 650kg
Dimension: 1300mmx927mmx1650mm
Melting material: CoCr/Titanium(need special assembly for Titanium)
Environment request: Temp 15 ºC-35ºC, Humidity≤95%, No vibration